RC Bargains : RSS Best Sellers Feed

HM-4#3B-Z-03 - Tail rotor for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 09:36:00 -0700

Tail rotor

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

We provide only genuine walkera spares and accessories, unless otherwise clearly stated, covering Walkera 2.4GHz models; HM-22E, HM-38#, HM-4#3B, HM-4G1B, HM-5#6, HM-53Q, HM-5G4Q3, and HM-5G6. If you cannot find the part you are looking for please feel free to e-mail us at support@rc-bargains.co.uk and we will do our best to help you out, usually within 24 hours.

AiRY Harden Blades for the ESky Lama V3, V4, Dauphin

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Apr 2010 11:48:00 -0700

AiRY Harden Blade II for the ESky Lama V3, V4, Co-Comanche, Dauphin, Walkera 5#10 and 5#4

These blades are stronger than the standard ESky and Walkera blades and come as a pack of 4 (2xA and 2xB Blades)

Extremely Tough ( 300% stronger than stock blade )
Elasticity ( better protection for blade clamp, shaft, gear and motor )
Light Weight ( do not affect performance )
Easy to install ( no modification required )

AIRY Harden Blade II is an improved version of the well-known Harden Blade. The material of Harden Blade II is better than the previous version.

AIRY Harden Blade Family AIRY Harden Blades are available in 3 sizes. They are AX-03 (Small), AX-05 (Medium) and AX-07 (Large). They are designed for different coaxial helicopters. Please select AIRY Harden Blade according to the model of your helicopter.

AX-03 is suitable for:

ESky Lama V3
ESky Lama V4
ESky Comanche
ESky Douphin
Walkera 5#10
Walkera 5#4
Walkera 5G4

AX-05 is suitable for:

Walkera 38#
Walkera 5G4Q3

AX-07 is suitable for:

Walkera 53#1
Walkera 53Q

AIRY Harden Blade II combines the strength and rigidity of the acrylonitrile and styrene polymers with the toughness of the polybutadiene rubber. The most important mechanical properties of STORM material is toughness and impact resistance.

Training Gear for Electric RC Helicopters

sales@rc-bargains.co.uk (Chris Davies) — Wed, 05 May 2010 13:17:00 -0700

Training gear suitable for small RC Helicopters such as the Honeybee CP2, Robins 22, Lama V4, and Walkera 52

FMS Simulator USB Interface Cable

sales@rc-bargains.co.uk (Chris Davies) — Wed, 23 Jun 2010 12:24:03 -0700

This is a USB interface cable designed to be used with the FMS flight simulator (Freeware Software to be downloaded seperatly)

The cable has been designed to accomodate both the ESky and Futaba RC Handsets and comes complete with the neccessary connectors.

This is compatable with 6-Channel handsets although priced the same as other stores sell the 4-Channel verion!

Items Included:

USB Cable
Adaptor for Futaba x2
Adaptor for E-Sky

HM-4#3B-Z-27 - Tail motor set for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Jul 2010 12:47:05 -0700

Tail motor set

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-4#3B-Z-26 - Main motor for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Apr 2010 13:14:00 -0700

Main motor

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-4#3B-Z-14 - Tail knighthead for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Apr 2010 13:15:00 -0700

Tail knighthead

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

EK2-0508 - Digital Servo

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Jul 2010 12:47:56 -0700

E-Sky Digital Servo (now replaces EK2-0500) Suitable for All E-Sky Heli's

Speed: 0.1 sec/60
Weight: 7.5g
Torque: 1.0kg/cm
Dimensions: 22.8 x 11.5 x 20.8mm
Wire length: 155mm

HM-4#3B-Z-17 - Tail boom for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Mon, 15 Mar 2010 12:07:00 -0700

Tail boom

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-4#3B-Z-21 - Canopy for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Apr 2010 13:14:00 -0700

Canopy

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

AiRY Harden Blades for the Walkera 38 and 5G4Q3

sales@rc-bargains.co.uk (Chris Davies) — Wed, 25 Feb 2009 21:02:00 -0800

AiRY Harden Blade II for the Walkera 38 and 5G4Q3

These blades are stronger than the standard ESky and Walkera blades and come as a pack of 4 (2xA and 2xB Blades)

Extremely Tough ( 300% stronger than stock blade )
Elasticity ( better protection for blade clamp, shaft, gear and motor )
Light Weight ( do not affect performance )
Easy to install ( no modification required )

AIRY Harden Blade II is an improved version of the well-known Harden Blade. The material of Harden Blade II is better than the previous version.

AX-03 is suitable for:

ESky Lama V3
ESky Lama V4
ESky Comanche
ESky Douphin
Walkera 5#10
Walkera 5#4
Walkera 5G4

AX-05 is suitable for:

Walkera 38#
Walkera 5G4Q3

AX-07 is suitable for:

Walkera 53#1
Walkera 53Q

EK1-0312/3 Plastic Blades A&B Set

sales@rc-bargains.co.uk (Chris Davies) — Tue, 16 Mar 2010 12:15:00 -0700

EK1-0312/3 Plastic Blades A & B Set for E-Sky Lama V3, Lama V4 or Robins 22 Helicopters Special Package of 2xA and 2xB Blades

HM-53Q-Z-01 - Main rotor blades for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Thu, 04 Feb 2010 19:22:00 -0800

Main rotor blades

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Century Dolphin CX 2.4GHz

Large Training Gear for Electric RC helicopters

sales@rc-bargains.co.uk (Chris Davies) — Wed, 23 Jun 2010 12:23:32 -0700

Larger Training Kit, Suitable for the 400/450 series of helicopters including the Belt CP and Honeybee King II

Each leg is 33cm long and the balls are made of solid foam.

The kit comes with:

2x Centre Hubs (For holding the legs in the cross shape)
8x Cable Ties (For attaching the training skids to your helicopter)
16x Grommets (For holding the foam balls on)

Replacement Centre hubs available HERE

EK1-0200A - Rotor Head Set

sales@rc-bargains.co.uk (Chris Davies) — Mon, 10 May 2010 12:33:00 -0700

Rotor Head Set

EK1-0181 - 7.4v 800mah Lipo

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Jul 2010 12:56:47 -0700

ESky 7.4v 800mah Lipo

HM-4#3B-Z-01 - main rotor blade for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 09:36:00 -0700

main rotor blade

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-4#3B-Z-12 - Battery frame for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Thu, 01 Jan 2009 17:04:00 -0800

Battery frame

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

EK1-0584 - Main Gear with one way bearing fitted

sales@rc-bargains.co.uk (Chris Davies) — Wed, 14 Jul 2010 12:35:03 -0700

ESky Main Gear with one way bearing fitted

EK1-0538 - Main shaft set (2 Pack)

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:05:23 -0700

ESky Main shaft set x2

HM-4#3B-Z-11 - Skid landing for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Tue, 16 Feb 2010 11:02:00 -0800

Skid landing

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

AiRY Harden Blades for the Walkera 53#1 and 53Q

sales@rc-bargains.co.uk (Chris Davies) — Wed, 25 Feb 2009 21:06:00 -0800

AiRY Harden Blade II for the Walkera 53#1 and 53Q

These blades are stronger than the standard ESky and Walkera blades and come as a pack of 4 (2xA and 2xB Blades)

Extremely Tough ( 300% stronger than stock blade )
Elasticity ( better protection for blade clamp, shaft, gear and motor )
Light Weight ( do not affect performance )
Easy to install ( no modification required )

AIRY Harden Blade II is an improved version of the well-known Harden Blade. The material of Harden Blade II is better than the previous version.

AX-03 is suitable for:

ESky Lama V3
ESky Lama V4
ESky Comanche
ESky Douphin
Walkera 5#10
Walkera 5#4
Walkera 5G4

AX-05 is suitable for:

Walkera 38#
Walkera 5G4Q3

AX-07 is suitable for:

Walkera 53#1
Walkera 53Q

EK1-T021 - Ball Link Plier

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Jul 2010 12:45:06 -0700

E-Sky Bent Ball Link Pliers, suitable for various RC Helicopters including the full E-Sky range

EK4-0009 - Main Rotor Blades

sales@rc-bargains.co.uk (Chris Davies) — Wed, 12 May 2010 12:48:00 -0700

ESky Main Rotor Blades

EK1-0229 - Rotor Head Set

sales@rc-bargains.co.uk (Chris Davies) — Thu, 03 Jun 2010 10:35:36 -0700

ESky Rotor Head Set

EK1-0201 - Ring Like Push Rod

sales@rc-bargains.co.uk (Chris Davies) — Thu, 17 Jun 2010 12:56:07 -0700

Ring Like Push Rod

Deans Connectors 1xMail 1xFemale

sales@rc-bargains.co.uk (Chris Davies) — Thu, 21 Jan 2010 07:28:00 -0800

Deans Connectors, 1xMale, 1xFemale

EK1-0303 - Main gear set

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:04:47 -0700

Main gear set

HM-4#3B-Z-22 - Tail motor wire for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 15 Jan 2010 16:22:00 -0800

Tail motor wire

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

EK1-0404 - Feathering Shaft Set

sales@rc-bargains.co.uk (Chris Davies) — Tue, 15 Jun 2010 18:24:10 -0700

ESky Feathering Shaft Set

EK1-0518 - Flybar case set

sales@rc-bargains.co.uk (Chris Davies) — Thu, 14 Jan 2010 13:20:00 -0800

ESky Flybar case set

EK4-0000 - Main Rotor Blades

sales@rc-bargains.co.uk (Chris Davies) — Thu, 03 Jun 2010 10:36:32 -0700

ESky Main Rotor Blades

HM-4#3B-Z-28 - Battery(3.7v 400mAh) for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:14:05 -0700

Battery(3.7v 400mAh)

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

Pitch Gauge for RC Helicopters

sales@rc-bargains.co.uk (Chris Davies) — Mon, 05 Jul 2010 13:01:25 -0700

This is a brand new mini pitch gauge suitable for RC helicopters with rotor blade widths of up to 40mm.

The gauge measures from +12 to -12 degrees and can be used with the E-Sky Belt CP and Honeybee range of helicopters

Specification:
Size : 135 X 50mm
Weight : 25g

This pitch gauge is suitable for all makes of RC helicopters that have variable pitch (up to 450 size).

EK1-0001A - Tail Motor

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:08:29 -0700

ESky Tail Motor

EK1-T010 - 5.5mm Socket Tool

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Jul 2010 12:44:50 -0700

5.5mm Socket Tool for use with the HoneyBee King II and Belt CP Standard Editions

HM-4#3B-Z-16 - Tail motor holder for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 09:42:00 -0700

Tail motor holder

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

EK1-0203 - Center Hub Set

sales@rc-bargains.co.uk (Chris Davies) — Wed, 17 Mar 2010 11:44:00 -0700

Center Hub Set

EK1-0348 - Pitch Gauge

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:01:37 -0700

The ESky screw pitch gauge is suitable for setting the pitch of almost any RC helicopter from -13 to +13 degrees where the pitch of the heli is adjustable. Fits blade widths of 25mm to 50mm

EK5-0395S - Steel Shaft for EK5-0201 (x2)

sales@rc-bargains.co.uk (Chris Davies) — Thu, 14 Jan 2010 16:33:00 -0800

Steel Feathering Shaft for EK5-0201

HM-4G1B-Z-09 - main rotor blades for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 15 Jan 2010 13:50:00 -0800

main rotor blades

Part of the Walkera range of Spares and Upgrades

We provide only genuine walkera spares and accessories, unless otherwise clearly stated, covering the Walkera 2.4GHz 2008 models; HM-22E, HM-38#, HM-4#3B, HM-4G1B, HM-5#6, HM-53Q, HM-5G4Q3, and HM-5G6. If you cannot find the part you are looking for please feel free to e-mail us at support@rc-bargains.co.uk and we will do our best to help you out, usually within 24 hours.

HM-4#3B-Z-06 - Balance bar for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Thu, 17 Jun 2010 12:57:01 -0700

Balance bar

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-4#3B-Z-13 - Tail gear for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Wed, 12 May 2010 12:52:00 -0700

Tail gear

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-22E-Z-38 - Ball linkage set for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:14:39 -0700

Ball linkage set

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Century Neon Blaze CX 2.4GHz

EK1-0186 - 3cell11.1V-1800mah 20C Li-po

sales@rc-bargains.co.uk (Chris Davies) — Mon, 08 Feb 2010 14:17:00 -0800

ESky 3cell11.1V-1800mah 20C Li-po

EK1-0284 - Ball control arm set

sales@rc-bargains.co.uk (Chris Davies) — Thu, 14 Jan 2010 12:58:00 -0800

ESky Ball control arm set

EK1-0541 - Tail driven pedestal set

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 10:12:00 -0700

Tail driven pedestal set

Tower Pro 9g Servo

sales@rc-bargains.co.uk (Chris Davies) — Mon, 15 Mar 2010 12:08:00 -0700

EK4-0150 - Carbon Fiber Tail Blades

sales@rc-bargains.co.uk (Chris Davies) — Thu, 14 Jan 2010 16:28:00 -0800

ESky Carbon Fiber Tail Blades

E-SKY Flight Case - Belt-CP / 450 helis

sales@rc-bargains.co.uk (Chris Davies) — Tue, 30 Mar 2010 19:42:00 -0700

This case fits the ESKY Belt-CP. Will fit other similar sized 450 series helicopters. Comes with pre-cut foam for 450 series helicopters. The Case fits the helicopter, transmitter, batteries and charger etc.

These cases are high quality and well worth the investment to keep you helicopter protected.

Dimensions: 620x300x190mm

EK1-0180 - 11.1v, 1000mah Lipo

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Jul 2010 12:56:42 -0700

ESky 11.1v, 1000mah Lipo

EK1-0422 - Flybar

sales@rc-bargains.co.uk (Chris Davies) — Wed, 09 Jun 2010 12:21:47 -0700

ESky Flybar

EK1-0206 - Paddle Control Frame (Outer)

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 10:08:00 -0700

Paddle Control Frame (Outer)

EK1-0350 - brushless speed controller 25A 9.2v-14.8v

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 09:41:00 -0700

ESky brushless speed controller 25A 9.2v-14.8v.

Supplied with Deans Connector as standard

Specification:

3-Lipo Battery
Maximum Burst Current: 50A
Maximum Continuous Current: 25A (280W)
BEC Electric Current: 5.0Vs/2A
Weak Battery Protection: 9.2V
Thermal Overload Protection:95�C

EK1-0401 - Balancing Pole Mount Set

sales@rc-bargains.co.uk (Chris Davies) — Thu, 03 Jun 2010 10:39:42 -0700

ESky Balancing Pole Mount Set

HM-22E-Z-01 - Main rotor blade for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 15 Jan 2010 13:34:00 -0800

Main rotor blade

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Century Neon Blaze CX 2.4GHz

EK1-0202 - Main Rotor Blades

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:04:30 -0700

Main Rotor Blades

EK1-0534 - Main gear set

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:05:36 -0700

ESky Main gear set. This item includes the Tail Drive Gear and bearings, but excludes the One-Way Bearing

HM-4#3B-Z-04 - Flybar connector for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 10:18:00 -0700

Flybar connector

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-5G6-1-Z-18 - Motor for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Mon, 15 Mar 2010 12:00:00 -0700

Motor

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Century Mosquito

EK1-0539 - Main gear excl One Way Bearing

sales@rc-bargains.co.uk (Chris Davies) — Thu, 01 Jan 2009 17:06:00 -0800

ESky Main gear excl One Way Bearing

RC Helicopter Blade Balancer

sales@rc-bargains.co.uk (Chris Davies) — Wed, 14 Jul 2010 11:26:44 -0700

High Quality Carbon Fibre Blade Balancer, situble for all 400/450 sized Helicopters

Turborix 7.4v 12c 800mAh 2 Cells Rechargeable Lipo Battery

sales@rc-bargains.co.uk (Chris Davies) — Wed, 09 Jun 2010 12:23:42 -0700

Turborix 7.4v Lipo battery with pre fitted JST Plug suitable for use with all ESky Lama Helicopters and the Robins 22 Range

These batteries are made of high quality chemical material with a much more stable and longer life than some other brands. Each cell has been tested by the manufactures before leaving the factory.

Specifications

Dischage Rate: 12C
Burst Discharge Rate: 20C
Connector: Balance / JST Plug
Size: 51.4 x 30.5 x 13.4mm
Weight: ~42g
Capacity: 800mAh
Voltage: 7.4v
Number of Cells: 2

EK1-0290 - Push link set

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 10:16:00 -0700

ESky Push link set

EK1-0535 - Tail boom set (2 Pack)

sales@rc-bargains.co.uk (Chris Davies) — Tue, 09 Mar 2010 12:46:00 -0800

ESky Tail boom set x2

EK1-0536 - Flybar

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 09:49:00 -0700

ESky Flybar

HM-4#3B-Z-02 - flybar paddle for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Tue, 16 Feb 2010 11:09:00 -0800

flybar paddle

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-5G6-1-Z-04 - Tail blade for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Thu, 28 Jan 2010 14:01:00 -0800

Tail blade

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Century Mosquito

Small Cable Ties (30x Per Pack)

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Apr 2010 11:49:00 -0700

HM-4#3B-Z-19 - Main frame for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Jul 2010 12:46:45 -0700

Main frame

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-4G3-Z-01 - Main Rotor Blades for Walker 4G3

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 10:02:00 -0700

Main Rotor Blades

Part of the Walkera range of Spares and Upgrades

We provide only genuine walkera spares and accessories, unless otherwise clearly stated, covering the Walkera 2.4GHz 2008 models; HM-22E, HM-38#, HM-4#3B, HM-4G1B, HM-5#6, HM-53Q, HM-5G4Q3, HM-4G3, HM-60#, and HM-5G6. If you cannot find the part you are looking for please feel free to e-mail us at support@rc-bargains.co.uk and we will do our best to help you out, usually within 24 hours.

HM-53Q-Z-22 - Battery 7.4v 1200mAh for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Thu, 14 Jan 2010 12:18:00 -0800

Battery 7.4v 1200mAh

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Century Dolphin CX 2.4GHz

HM-5G6-1-Z-05 - Skid landing for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Thu, 28 Jan 2010 11:41:00 -0800

Skid landing

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Century Mosquito

HM-4#3B-Z-08 - linkage set for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 10:29:00 -0700

linkage set

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-4G1B-Z-28 - battery(3.7V 1000mAh) for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Mon, 18 Jan 2010 10:40:00 -0800

battery(3.7V 1000mAh)

Part of the Walkera range of Spares and Upgrades

E-SKY Aluminum Flight Case - Fits Honeybee, CP2, King 1 & 2

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 10:03:00 -0700

This case fits the ESKY Honeybee, Honeybee CP2, King and King 2. Will fit other similar sized helicopters. Comes with pre-cut foam for the above helicopters. The Case fits the helicopter, transmitter, batteries and charger etc.

These cases are high quality and well worth the investment to keep you helicopter protected.

Dimensions: 600x300x180mm

EK1-0504 - Foam Blade Holders

sales@rc-bargains.co.uk (Chris Davies) — Mon, 03 May 2010 17:26:00 -0700

These are the ESky Foam Blade Holders suitable for the HoneyBee and Belt CP range of RC helicopters. Sold 2 per pack

EK4-0004 - Main Rotor Blades

sales@rc-bargains.co.uk (Chris Davies) — Mon, 28 Jun 2010 12:58:43 -0700

ESky Main Rotor Blades

HM-38-Z-01 - Main rotor blades for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Thu, 04 Feb 2010 19:22:00 -0800

Main rotor blades

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Century Chinook CX 2.4GHz

EK1-0239 - Landing Skid Set

sales@rc-bargains.co.uk (Chris Davies) — Mon, 31 Aug 2009 14:40:00 -0700

ESky Landing Skid Set

EK1-0521 - Controlling rod set

sales@rc-bargains.co.uk (Chris Davies) — Wed, 10 Mar 2010 12:36:00 -0800

Controlling rod set

EK1-0445 - Flybar Control Arm Set

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:05:07 -0700

ESky Flybar Control Arm Set

EK1-0542 - Tail blade main shaft set

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 10:25:00 -0700

ESky Tail blade main shaft set

HM-4#3B-Z-24 - Screw set for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 10:28:00 -0700

Screw set

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

EK1-0187 - 3cell11.1V-2100mah 20C Li-po

sales@rc-bargains.co.uk (Chris Davies) — Mon, 08 Feb 2010 14:17:00 -0800

ESky 3cell11.1V-2100mah 20C Li-po

HM-5#6-Z-18 - Motor(1215) for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 30 Apr 2010 13:23:00 -0700

Motor(1215)

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Century Mini 47G

EK4-0151 - Carbon Fiber Paddles

sales@rc-bargains.co.uk (Chris Davies) — Tue, 21 Jul 2009 13:59:00 -0700

ESky Carbon Fiber Paddles

HM-4#3B-Z-20 - Main gear for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 15 Jan 2010 16:22:00 -0800

Main gear

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Buzzflier - Buzz Fly Micro RC Helicopter

HM-53Q - Walkera 53Q, 2.4GHZ, Metal Rotor Head for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Wed, 14 Apr 2010 12:52:00 -0700

The NEW Walkera 53Q Daulphin 2.4GHz Remote Controlled Helicopter comes complete Ready to Fly (RTF) with both a 4 Channel Transmitter and Receiver included, along with everything needed to get you airborne except the 8x AA batteries required for the transmitter!

This model has the very latest 2.4 GHz technology and a high quality CNC (metal) rotor head, suitable for use both indoors and outdoors in calm weather conditions

Features

CNC-machined metal rotor head and coaxial structure, highly emulational shape with the-state-of-the-art workmanship.
New 2.4G spread spectrum technology, with the functions of automatic code pairing and ID assignment, can allow many RC aircrafts to fly in the same field and same time.
It utilizes the 2.4G 4-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment.
High performance 2 x 370SH motor, powered by 7.4V 1200mAh Lipo, offers 10-to 13-minute flight time, depending on the flight modes.

Specifications

1). Main Rotor Dia. B : 450mm

2). Main Rotor Dia. A : 450mm

3). Overall Length: 446mm

4). Receiver: RX-2413

5). Gyro: Built-inAll-up

6). Weight: 380g (Battery included)

7). Transmitter: WK-2401

8). Main Motor: 2*370SH

9). Battery: 7.4V 1200mAh Li-Po

10).Servo: wk-7.6-3 8.5g, speed 0.11sec/60o(4.8V), torque 0.9kg/cm (4.8V)

Walkera HM53Q Dauphin CNC rotor head

Walkera HM53Q Dauphin CNC Swashplate

WK-2401 4-Channel Transmitter

To find out more, download the Walkera 53Q Dauphin User Maunal by clicking the image below...

We Supply all the spare parts, upgrades and accessories to support this helicopter, so should an accident occur, just give us a ring, or e-mail us and we will be happy to help you out.

All our helicopters are dispatched via Parcelforce and are insured in transit.

Please note the Walkera 53Q RC Helicopter is not suitable for children under 14 years of age. Care should be taken during operation of these helicopters as injury can result from inappropriate use.

HM-5G4Q3-Z-07 - Small Shaft for Walkera RC

sales@rc-bargains.co.uk (Chris Davies) — Fri, 15 Jan 2010 14:29:00 -0800

Small Shaft

Part of the Walkera range of Spares and Upgrades

This part is also suitable for use with the Century Airwolf CX 2.4GHz

EK1-0219 - Tail Rotor Blade

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Apr 2010 13:28:00 -0700

ESky Tail Rotor Blade

EK1-0565 - Main shaft set

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:07:05 -0700

ESky Main shaft set for HoneyBee King II

ESKY Honeybee 4ch RTF RC Heli

sales@rc-bargains.co.uk (Chris Davies) — Tue, 30 Mar 2010 19:41:00 -0700

E-SKY Honey Bee RTF (Ready To Fly)

The popular E-SKY Honey Bee available in a RTF - Ready To Fly Format!

The ESKY Honey Bee Series RC helicopter features good performance for superior strength, stability, controllable flight and durability, which are favored by flyers all over the world. Honey Bee helicopter is designed with the beginner in mind, has been completely assembled in factory, simply connect the battery and off you go. CCPM (collective cyclic pitch mixing) system to ensure the helicopter flys perfectly.

Specification

Main rotor diameter: 520mm
Weight: 290g
Length: 510mm
Power system: 370 motor
Transmitter: standard 4CH
Mix controller: 4in1 controller (W/Gyro, mixer, ESC, receiver)
Servo: digital servos (7.5g,1.0kg.CM,0.10s/60°)
Battery: 8.4V-650mAh Ni-MH

And of course don't worry about spares; we have large stocks of everything you will need!

4 in 1 controller (included : gyroscope, mixing control, speed control and receiver)

Optional aluminum cooling unit to increase flight time

Optional beginners training gear

Optional cooling unit has not only improved the flight performance, but it also increases the service life.

Optional Aluminum Case (not supplied with this product)

AiRY Harden Landing Skids

sales@rc-bargains.co.uk (Chris Davies) — Fri, 15 Jan 2010 16:23:00 -0800

Almost indestructable, made with flexible plastic, you can't compare this landing skid with original ESKY landing skid, totally two different world.

EK1-0574 - Landing Skids

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Jul 2010 12:55:46 -0700

EK1-0574 Landing Skids for Lama V4

EK5-0201 - CNC Main Blade Holders

sales@rc-bargains.co.uk (Chris Davies) — Tue, 06 Jul 2010 14:07:24 -0700

ESky CNC Main Blade Holders

ESKY Honeybee CP II RTF RC Helicopter

sales@rc-bargains.co.uk (Chris Davies) — Tue, 30 Mar 2010 19:41:00 -0700

E-SKY Honey Bee CP2 RTF (Ready To Fly)

The popular E-SKY Honey Bee CP2 available in a RTF - Ready To Fly Format!

Honey Bee series RC Helicopter features high flight stability, Superior strength, Simple operation and durability. Honey Bee cp2 is designed as a 3D aerobatics mini-electric helicopter with CCPM system and three ESKY Servos to ensure accuracy and Sensitivity. 11.1v 1000mAh lithium polymer batteries extend the flying time upto 15 mins at a time, whilst a 4 in 1 controller provides the functions of ESC, mixer, receiver and Gyro, all in one.

Specification

Main rotor diameter: 530mm
Weight: 305g
Length: 520mm
Main Blades: Wooden
Power system: 370 motor
Transmitter: standard 6CH CCPM System
Mix controller: 4in1 controller (W/Gyro, mixer, ESC, receiver)
Servo: digital servos (7.5g,1.0kg.CM,0.10s/60°)
Battery: 11.1V 1000mAh Li-Po

And of course don't worry about spares; we have large stocks of everything you will need!

High-precision, high inertia of the main rotor head design, ccpm control system

Multi-functional controller and the installation of the optional aluminum heatsink

Servos support the CCPM controlling system, ensuring helicopter can react quickly and nimbly to do all kinds of 3D flight

Optional cooling unit has not only improved the flight performance, but also increased the service life

Optional Aluminum Case (not supplied with this product)

HM-060-Z-23 - Main Gear Set for Walker 60#

sales@rc-bargains.co.uk (Chris Davies) — Fri, 28 May 2010 10:19:00 -0700

Main Gear Set

Part of the Walkera range of Spares and Upgrades

We provide only genuine walkera spares and accessories, unless otherwise clearly stated, covering the Walkera 2.4GHz 2008 models; HM-22E, HM-38#, HM-4#3B, HM-4G1B, HM-5#6, HM-53Q, HM-5G4Q3, HM-4G3, HM-60#, and HM-5G6. If you cannot find the part you are looking for please feel free to e-mail us at support@rc-bargains.co.uk and we will do our best to help you out, usually within 24 hours.

EK1-0248 - Main Frame Assembly

sales@rc-bargains.co.uk (Chris Davies) — Tue, 18 Aug 2009 14:07:00 -0700

ESky Main Frame Assembly

EK1-0313 - Plastic Blades B

sales@rc-bargains.co.uk (Chris Davies) — Tue, 20 Jul 2010 12:47:34 -0700

ESky Plastic Blades B